What Is the Cheapest Exterior Cladding Option?

What Is the Cheapest Exterior Cladding Option?

Find out the cheapest exterior cladding option by price, and why the lowest cost material isn't always the cheapest wall over time.

Louis Major 6 min read

    Vinyl cladding is the cheapest exterior cladding option to buy, usually priced between $40 and $70 per square metre installed. That figure looks good on a quote. It does not tell you what the wall will cost you five or fifteen years later. Price is what you pay on day one. Cost is what you pay across the life of the wall. Mixing the two up is how a cheap job turns into an expensive one.

    What’s actually the cheapest cladding to buy?

    By raw price per square metre, the order usually runs like this:

    • Vinyl cladding: roughly $40 to $70 per square metre installed
    • Fibre cement cladding: roughly $50 to $90 per square metre installed
    • Timber weatherboard (wood): roughly $80 to $150 per square metre installed
    • Brick veneer: roughly $200 to $300 per square metre once you include the structure behind it

    If you only look at the first number on the quote, vinyl cladding wins every time. I’ve had clients walk in set on vinyl before we’ve even talked about their site, because they saw a price online and locked it in as the answer.

    Why does the cheapest price not mean the cheapest wall?

    A wall is not just the sheet or board you see from the street. It includes the fixings, the cavity, the flashing, and the prep work on the structure behind it. Cheap material on a poorly prepared wall fails faster than mid-range material on a well-built one.

    I remember a client who chose vinyl cladding purely on price for a coastal renovation. Nobody told him vinyl softens and distorts near reflected heat, like off a dark window or a barbecue. Within two summers, panels near his outdoor kitchen had visibly warped. The fix cost more than the gap between vinyl and a better product would have cost at the start.

    Does cheap cladding affect your building insulation?

    Yes, and this is the part most price comparisons skip. Cladding is one layer in a wall system that also includes the frame, any sarking, and your building insulation. Thin, cheap cladding with no insulating value does nothing to stop heat moving through the wall. You end up leaning harder on your air conditioner and heater to do the job the wall should share.

    Thermal insulation is rated by R-value, and the cladding layer itself usually isn’t the main contributor. But a cavity behind the cladding, paired with a continuous layer of insulation in the frame, performs far better than a wall where cheap sheeting sits hard up against the structure with no gap. One of my clients in Victoria swapped ageing fibre cement cladding for a ventilated cavity system. Her winter heating costs dropped noticeably, and she hadn’t touched the insulation batts at all. The airflow and the new cladding layer did that on their own.

    What hidden costs show up after the cladding goes up?

    This is where the real price gap closes.

    Vinyl cladding

    Cheap to buy, but it fades in UV, becomes brittle in cold climates, and cracks on impact. Once a panel cracks, you’re often replacing a whole run because colours don’t match after a few years of sun exposure.

    Fibre cement cladding

    A step up in durability, but it needs painting, and painting needs repeating. Joints need sealing and resealing. Skip that maintenance and water gets behind the sheet, which is a structural problem, not a cosmetic one. I had a client call me three years after installing fibre cement cladding because a hairline gap at a joint had let moisture into the wall cavity. The repair involved opening the wall, not just a touch-up.

    Wood

    Timber weatherboard looks good and costs more upfront than vinyl or fibre cement cladding, but it needs ongoing sealing or painting to resist rot, insects, and warping. In humid or coastal regions, that maintenance cycle comes around fast. Skip a cycle and the wood swells, splits, or lets moisture through to the frame.

    Brick

    Brick holds up well and needs almost no maintenance on the brick itself, but it’s the most expensive to install because of the extra structure and footings it demands. It’s also not something you can bolt onto an existing wall cheaply if you’re renovating rather than building new.

    What is the cheapest cladding option when you count the next twenty years?

    Once you add up paint jobs, sealant, repairs, and energy bills, the material with the lowest sticker price is rarely the one with the lowest total cost. This is where a composite timber product changes the maths. Composite cladding, like Futurewood Cladding, costs more than vinyl cladding to buy, but it’s installed once and left alone. No repainting. No resealing joints every few years. No warping from heat like vinyl, no rot like wood, and no need for the heavy structure that brick requires.

    I know this because clients who switch to it almost always ask the same question six months in: “What do I need to do to maintain it?” The honest answer is close to nothing. Wash it down occasionally and that’s it. Compare that to a fibre cement cladding wall that needs repainting within five to seven years, or a timber wall needing annual attention, and the gap in total cost closes fast, then reverses.

    How do you pick the right cladding for your budget?

    Ask these three things before you choose on price alone:

    1. What’s my realistic maintenance budget, not just my build budget? If you can’t commit to repainting or resealing on schedule, cheap material becomes expensive material fast.
    2. What’s happening behind the cladding? Under the National Construction Code, external walls need to manage moisture and be fixed to the structure in a way that meets wind and weatherproofing requirements. A cavity, proper flashing, and correctly specified building insulation matter more to your long-term cost than the cladding brand on the surface.
    3. How long do I actually want to own this problem? If you’re flipping a property in two years, the cheapest material might be the right call. If you’re staying for a decade or more, the lowest price option usually becomes the most expensive one you’ll own.

    In my experience, the clients happiest five years out are rarely the ones who chose on price alone. They’re the ones who matched the material to how long they planned to live with the wall.

    If you want the lowest price today, vinyl cladding wins. If you want the lowest cost over the life of your home, with no maintenance once it’s properly installed, look at composite cladding before you sign off on anything. Get a quote that breaks down material price, installation, and expected maintenance over ten years, then compare the real numbers side by side.

    Louis Major

    About the author

    Louis Major

    Business Development Manager

    Louis is passionate about composite timber and low maintenance building materials, customer service and making sure that our customers are given all the information that they need to make an informed decision about their project.

    Married with a 2 year old son that loves to help in the business by stacking up composite timber colour samples.

    FuturewoodNovember 5, 2026